Ecu Flash Software

воскресенье 30 декабряadmin
Ecu Flash Software Rating: 6,1/10 5729 reviews

What is MPPS ECU Software?

Jul 10, 2014  Went to test it out, and it works on my 98 ECU! Think I'm the first person ever to flash a DSM ECU. 98/99 DSM ECU Flash FAQ Capabilities: EcuFlash allows you to edit all the factory maps. In addition, the 98/99 map axis can be rescaled. This means if the factory fuel map had a max of 7000 RPM, you can rescale the RPM axis to go up 10000 RPM. The NefMoto ME7 ECU flasher is a free tool that allows you to read and write the flash memory in your ME7 ECU in car over the OBD port. All that is required is a FTDI based USB OBD cable that works in 'dumb' mode.

MPPS is a ECU programming/flashing software work with MPPS interface.It allow you access to read & write data,support checksum,and it also include many other features.

MPPS ECU Software Function & Features:

1.Recalculation of checksum
2.Read / write flash
3.Support Marelli ECU’s
4.Auto detect ECU and processor type.No need to select from list,everything si automatic!
5.Read/Write of all memories eeprom,irom,xrom(where possible)
6.Patch function for OBD Flashing of TPROT ECU’s (support only VAG at the moment)
7.TPROT/DS check feature,for testing if TPROT is actvie without opening ECU.
8.Supports Bosch up to TP12
9.Support for unlocking fo VAG Simens(current only for ECU’s without password protection).
10.Support for unlocking of VAG Simos PCR and Simos 8.
11.Checksum correction supported for Bosch MEDC17.
12Recovey ECU (in some case)

MPPS ECU Software Support Languages:

English, Afrikaans, Albanees, Bahasa Melayu, Cech, Cymraeg, Deutsch, Esti, Espanol, Filipino, Finnish, Francais, Galego, German, Hrvatski, Indonesia, Italiano, Kiswahili, Latviesu, Lietuviskai, Magyar, Malti, Nederlands, Norsk, Polska, Portuguese, Rmoanian, Slovencina, Slovenski, Srpski, Suomea, Svensk, Turkish.

MPPS ECU Programmer Price:

Original MPPS Price:

FeatureSlave

(obd & Tricore)

Standalone MasterMasterVirtual Master
Price$1000-$2000$2500-$3500$3000-$4000$1000
Read from vehicle×
Write to vehicle×
Reads open/encrypted filesEncyptedOpenOpenN/A
Can have slave units××
Auto Checksum×
Checksum button××
Online updates×

MPPS V18 Clone Price €62.00–MPPS V18.12.3.8

MPPS V16 Clone Price $15.99–MPPS V16.1.02 ECU Chip Tuning Tool

MPPS ECU Software Free Download:

MPPS V22 Download:

The MPPS V22 download only available for original MPPS device,need buy on official website:

MPPS V21 Free Download:

MPPS V18 Free Download:

MPPS ECU Software Car List:

Alfa Romeo,Audi,BMW,Chevrolet,Citroen,Ducati,Ferrari,Fiat,Ford,Generic,Honda,Hyundai,Isuzu,Iveco,Jaguar,Jeep,Kia,KTM,Lancia,Land Rover,London Taxis International,Mazda,MCC-Smart,Mercedes Benz,MG,Mini,Nissan,Opel,Peugeot,Porsche,Renault,Saab,Seat,Skoda,Suzuki,Vauxhall,Volkswagen,Volvo.

MPPS V21 Car List Detail here

MPPS V18 Car List Detail here

MPPS New Update Note:

MPPS Update V22.0.5.22 (Only Original available)

Added Opel Vivaro EDC16 to the Database.
Added CRD3.1 checksum to MPPS.
Added PSA/Ford DCM3.5 eeprom R/W.
Added PSA DCM 3.4 R/W/Cks.
Added Smart ME7.7.0 EEprom boot mode.

VAG ME7.5 – Special mode added R/W/Cks Kline
VAG ME7.5 – Special mode added R/W/Cks Eeprom Kline
VAG MEDC17 drives will now show if the ecu has been OBD unlocked.

Updated Volvo ME7 checksum both internal and external.
Corrected Volvo ME7 comms problem.
Corrected Volvo EDC15C11 comms problem.
Updated Bosch checksum to do dual boot files.
Updated Mercedes ME2.8 seed key.

For MPPS Clone version can not support update.

MPPS ECU Software Reviews:

Astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok, just choose read all( where avaible)

simos pcr 2.1 R/W obd ok
was unlocked few months ago with ktag

ME7.3.H4 boot mode read /write full OK

Peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK

MED17.4 peugeot 207 read write ok

Citroen c5 DCM3.5 read write OBD ok, checksum ok

Software

Opel cdti 1.7 ecu Denso R/W ok

Linea 2011 Marelli 6F3 read/write OBD Trought K-line, ( FG 54 read only flash trought CAN)

VW PCR 2.1 work v18 clone no problem

read and write on bench

Ford – SID206
Opel – EDC16C9/39,PSG16CANR/W OBD ok

Ford edc16c34 2.20 r/w ok
yesterday i have tested mpps v18 into myFord Focus 2 edc16c34.
read about 10 min and write 3-4 min

Focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min i wait another 2 min, like software says

MPPS ECU Software FAQs:

Question 1:Does the MPPS-V16 work with Windows 7 or Windows 10

Answer 1: Yes, The version that we include (16.1.0.2) runs without the loader and works with Windows XP SP2 and 7 8 10 32/64 bit.Please note that older versions of other versions found online may not be compatible with Windows 7/10

Question 2: Will MPPS V18 read Jeep Cherokee EDC15 and EDC16 models?

Answer 2: Some bloger have reported issues with reading Chrysler Jeep Cherokee 2.8L 3.0L EDC16CP31 models. We don’t recommend using MPPS V16 for these models at this time

Question 3:What is the difference Between Original and Clone?

Answer 3:Clone MPPS can not update,but with same function like original (if you buy clone mpps,you would better to ask for function you want,sometime clone mpps can not support some function as original).Clone MPPS is cheaper than original only $15-$100,but original over $2000.

FromAuto Repair Technician Home, postMPPS V22 V21 V18 V16 ECU Programming Software Free Download

Readers who read this article also read:

All questions about chip tuning / reprogramming / ECU flashing / changing car's data, performance or behavior.. can be answered by reading this 'How To' article.

Mariah carey glitter torrent. So to answer any question about this process, I'll explain it like this..

Actually before you continue below, you should know that chip tuning is only recommended if you have previous chiptuning experience or time to learn it.

So besides outlining the process of tuning and what is involved — you will also be somewhat tested if you are READY and WILLING to do it.

TIP: If you want to learn ECU programming, there are hundreds of tutorials online that'll teach you just by Googling: 'ECU chip tuning'or 'ECU programming'. Of course, TOAD chip tuning software will also point you to some excellent programming resources online, to get you started, or improve your existing skills.

So let's get started..

Yes, TOAD© Software can tune cars. Meaning change cars performance, how it functions or behaves. This process for us techno-nerds is called chiptuning.

Yes, TOAD software can tune vehicle performance or change the way it behaves.

However, first and most important step is: You must FIRST find a tuner that supports your car model/year.

Because the tuner is what will extract the cars data to your computer, as a file.

Then you can edit this file inside TOAD editor, make changes, and upload the file back to car using the tuner.

So basically, to tune successfully you need 3 things to get started with confidence:

  1. TOAD Tuning Software: Allows you to edit car's ECU data. Here is a screenshot of included TOAD ECU tuning software..

    TOAD ECU Map Editing Software: Enlarge

    It may be overwhelming at first. And it is! But an hour or two and you'll ge the hang of it.

    Basically all you are doing is changing the numbers that correspond with different behaviors within the car.

    Example: Torque has number 1-255. On your car, it may be currently set at 200. Well, you can increase this to 210.

    The other side of tuning requires HEX editing skills. And this is the reality 95% of the time, which is ABSOLUTELY REQUIERED.

    Good news is there are many online resources that will teach you about HEX. Also, TOAD will include additional resources and online forums that discusses everything related to tuning / programming.

    As a final test if you are READY and WILLING, here is basics of tuning and the kind of editing skills you need to know.

  2. TUNER KIT:

    This is needed because it's purpose is to download/upload cars map file to your computer.

    There's many tuners available.

    Which one to get?

    Whichever supports your car. They are all literally the same. Whether a tuner costs $2000 or $200, it does exactly the same thing.

    So get whichever tuner supports your car. That's the only criteria to common question of 'Which one do I get for my car?'.

    You can find the best tuners on the market here.


  3. Identify or Find Car's ECU Part Number: To make sure it's compatible with the tuner kit in #2 above.

STEP 1:

Plug tuner into car. Load it's software. Turn on car ignition. Press 'Download Data / Read'.

STEP 2:

Open TOAD ECU editing software. And open the file you downloaded from car in Step 1.

STEP 3:

Make changes to the file via HEX editing.
Example: Find and change data that correspond to: torque, BHP, RPM to gear change ratio, etc.

STEP 4:

Save the file inside the TOAD ECU editing software.

STEP 5:

Go back to tuner software, open the file from Step 4, and press 'Upload to Car / Copy'.

WARNING: Always have backup of original file! If vehicle misbehaves, then upload original file from Step 1.

That's it! By doing a successful tune — you've just saved yourself thousands of dollars on doing custom tune at a car shop. Including saving on future additional fuel costs and unnecessary brake-down repairs.

So if you are still READY and WILLING after reading this article, then get started by:

  1. Get TOAD software.
  2. Get a Tuner Kit that supports your car. (If none support your car — then tuning is not possible as we already include the best tuners in the world that cover maximum range of cars).
  3. Identifying or Finding Car's ECU Part Number: To make sure it's compatible with the tuner kit in #2 above.
    Here are additional High-End professional tuners that may support your car(s):